OMAX 80X Series JetMachining Center

The OMAX 80X Series is a robust and reliable abrasive waterjet system available in several length variants designed for your specific needs. The bridge-style 80X Series is ideal for cutting larger or multiple part projects in a variety of materials. The 80X Series employs the innovative patented Intelli-TRAX® linear drive technology designed exclusively for the abrasive waterjet environment, ensuring superior accuracy and high durability for greater productivity and profitability.

Inquiry

Fastest cutting speeds and best precision compared to any abrasivejet in the industry and is backed by our exclusive IntelliMAX® Software with real world cutting data
Programmable Motorized Z-Axis with a precision OMAX MAXJET®5i Nozzle Assembly can boost cutting productivity and process efficiency
Increase machining capacity with optional DualBRIDGE system
Low maintenance, high reliability scissor-style hard plumbing
Drive system sealed against water, dirt, and grit.
High efficiency Generation 4 EnduroMAX® pump systems available up to 100 hp with operating efficiencies up to 85%
Rapid Water Level Control for quiet and clean submerged cutting
Bulk Abrasive Feed Assembly transports garnet from the assembly’s large hopper into the Zero Downtime Hopper located at the Motorized Z-Axis
Shipped pre-assembled and factory-tested
Machines a wide range of materials and thicknesses, from metals and composites to glass and plastics
Does not create heat-affected zones or mechanical stresses
No tool changes and minimal fixturing reduces setup by 50% or more
No additional water required for pump cooling
Small, efficient footprint for minimal floorspace utilization
Leaves behind a satin-smooth edge, reducing secondary operations
No noxious gases, liquid and oils used in, or caused by, the machining process
EnduroMAX pump technology delivers the highest nozzle horsepower in the industry for faster and more efficient cutting
Completes most work below 80 dBA at one meter for submerged cutting
Environmentally “green” system with quiet and clean operation with low electrical consumption
Highly robust and reliable pump design capable of over 1000 hours between maintenance

Machine Dimensions
Footprint (with controller)		22’1” x 12’8” to 35’0” x 15’0” (6,731 mm x 3,861 mm to 10,668 mm x 4,572 mm)
Weight (tank empty)		9,000 lbs to 13,000 lbs (4,082 kg to 5,897 kg)
Height (with scissor plumbing)		12’0” (3,658 mm)
Operating Weight		34,000 lbs to 54,000 lbs (15,422 kg to 24,494 kg)
Work Envelope
X-Y Cutting Travel		13’4” x 6’8” to 26’8” x 6’8” (4,064 mm x 2,032 mm to 8,128 mm x 2,032 mm)
Z-Axis Travel		8” (203mm)
Table Size		15’0” x 7’5” to 28’3” x 7’5” (4,572 mm x 2,261 mm to 14,783 mm x 2,261 mm)
Drive Description
Closed loop, digital drives Brushless servo motors IntelliTRAX drive technology with linear encoders in X-Axis Precise Motorized Z-Axis

Standard Model Specifications
Material Support Slats		4" x 1/8" Galvanized Steel
Maximum Supported Material Load		400 lbs/ sq ft (1,950 kg/ sq meter)
Electrical Requirements		3-Phase, 380-480 VAC ±10%, 50-60 Hz
Noise Level		Below 80dBA at one meter for submerged cutting
Speed	(80X & 80X-1)	180 in/min (4,572 mm/min)
Speed	(80X-2)	350 in/ min (8,890mm/ min)
Linear Positional Accuracy		±0.001" (±0.025mm)
Repeatability		±0.001" (±0.025mm)
Ballbar Circularity		±0.003” (±0.076 mm)
Optional Accessories
Tilt-A-Jett® Cutting Head Variable Speed SRS (VS-SRS) Collision Sensing Terrain Follower (with Tilt-A-Jet only) Z-Axis Drill Precision Optical Locator (POL) Water-only MAXJET 5 for cutting soft materials OMAX Mini MAXJET 5i Nozzle Assembly DualBRIDGE second bridge Manual Tilt Z Second MAXJET 5i with Motorized Z-Axis (requires second Y-Axis carriage) Laminar Filter Large Solids Removal System Waterjet Brick Kit Rotary Axis Air and Water Conditioning Kit A-Jet® Terrain Follower/A-Jet Material Holding Kit Laser Feature Finder (see more...)
*Optional accessories may reduce cutting travel. Photos may show optional accessories. For a complete list of accessories, contact an OMAX sales representative. Accuracy specifications are at 72° F (22° C) Pumps are built to meet UL and CE specifications. Contact OMAX for detailed utility requirements.