OMAX-2626 JetMachining Center

OMAX® 2626 JetMachining® Center

The compact size and high accuracy of the 2626 JetMachining® Center makes it ideal for high precision waterjet machining, from research and development to small part prototyping and production. The 2626 utilizes the fast, efficient, and powerful Intelli-MAX® Software Suite to achieve superior performance while cutting complex parts out of most materials. With the optional Tilt-A-Jet® and 7/15 Mini MAXJET® nozzle, the 2626 is capable of precision miniature machining.

Inquiry
  • Fastest cutting speeds and best precision compared to any abrasivejet in the industry and is backed by our exclusive IntelliMAX® Software with real world cutting data
  • Programmable Motorized Z-Axis with a precision MAXJET 5i Nozzle Assembly boosts cutting productivity and process efficiency
  • Tilt-A-Jet taper compensating abrasivejet cutting head (available as an option)
  • Precision X-Y Axis rigidly mounted to the cutting table
  • Pre-loaded linear bearings and precision ball screws
  • Low maintenance, high reliability scissor-style hard plumbing as an option
  • Drive system sealed against water, dirt, and grit
  • High efficiency Generation 4 EnduroMAX® pump systems available in 30, 40, or 50 hp with operating efficiencies up to 85%
  • Robust and accurate design for tight tolerance cutting and reliable operation
  • Rapid Water Level Control for quiet and clean submerged cutting
  • Easy operator access to the work area
  • Shipped as a completely pre-assembled and factory-tested system
  • Machines a wide range of materials and thicknesses, from metals and composites to glass and plastics
  • Does not create heat-affected zones or mechanical stresses
  • No tool changes and minimal fixturing reduces setup by 50% or more
  • No additional water required for pump cooling
  • Small, efficient footprint for minimal floorspace utilization
  • Leaves behind a satin-smooth edge, reducing secondary operations
  • No noxious gases, liquids, or oils used in, or caused by, the machining process
  • EnduroMAX pump technology delivers the highest nozzle horsepower in the industry for faster and more efficient cutting
  • Completes most work below 80 dBA
  • Environmentally “green” system with quiet and clean operation with low electrical consumption
  • Highly robust and reliable pump design capable of over 1000 hours between maintenance
  • Optional Variable Speed Solids Removal System (VS-SRS) designed for tough industrial use increases uptime through automated solids removal
Machine Dimensions
Footprint (with controller) 9’ 8” x 6’ 0”
(2,946 mm x 1,829 mm)
Weight (tank empty) 3,000 lb (1,361 kg)
Height (with whip plumbing) 8’ 4” (2,540 mm)
Operating Weight 6,517 lb (2,962 kg)
Work Envelope
X-Y Cutting Travel* 2’ 5” x 2’ 2”
(737 mm x 660 mm)
Z-Axis Travel (with Motorized Z Axis)* 8” (203 mm)
Table Size 3’ 10” x 2’ 7”
(1,168 mm x 787 mm)
Drive Description
  • Closed loop, digital drives
  • Brushless servo motors
  • Pre-loaded ball screws,recirculating ball bearings
  • Linear bearings with hardened, precision ground ways
  • Cantilever Y-axis on bridge X-axis
Standard Model Specifications
Material Support Slats 4" x 1/8" Galvanized Steel
Maximum Supported Material Load 400 lbs/sq ft (1,950 kg/sq meter)
Electrical Requirements 3-Phase, 380-480 VAC ±10%, 50-60 Hz
Noise Level Below 80 dBA at one meter for submerged cutting
Speed 180 in/min (4,572 mm/min)
Linear Positional Accuracy ±0.001” (±0.025 mm)
Repeatability ±0.001” (±0.025 mm)
Ballbar Circularity ±0.003” (±0.076 mm)
Optional Accessories
  • Tilt-A-Jet Cutting Head for taper compensation
  • Variable Speed SRS (VS-SRS)
  • Collision Sensing Terrain Follower
  • OMAX Drill Head
  • Precision Optical Locator (POL)
  • Rotary Axis
  • Laser Feature Finder
    Water-only MAXJET 5 for cutting soft materials
  • OMAX Mini MAXJET 5i Nozzle Assembly
  • Manual Tilt Z
  • Laminar Filter
  • Waterjet Brick Kit
  • Catcher Tank Armor Plating
  • Stainless Steel Tank Cover Kit
  • Material Holding Kit

     (see more...)
*Optional accessories may reduce travel. Photos may show optional accessories. For a complete list of accessories, contact an OMAX sales representative. Pumps are built to meet UL and CE specifications. Contact OMAX for detailed utility requirements.


Note: Specifications subject to change without notice.