OMAX 2652 JetMachining Center

The original OMAX JetMachining® Center, the 2652 is a popular fixture in machine shops and fabrication facilities. The proven OMAX technology leads to efficient production through fast and accurate cutting of complex parts out of most materials. With the simple yet powerful Intelli-MAX® Software Suite and innovative optional accessories such as the Tilt-A-Jet®, the 2652 can quickly switch from near net blank shape cutting to high precision machining.

Inquiry

Fastest cutting speeds and best precision compared to any abrasivejet in the industry and is backed by our exclusive Intelli-MAX Software with real world cutting data
Programmable Motorized Z-Axis with a precision OMAX MAXJET®5i Nozzle boosts productivity and process efficiency
Optional Tilt-A-Jet taper eliminating abrasivejet cutting head
Precision X-Y Axis rigidly mounted to the cutting table
Pre-loaded linear bearings and precision ball screws
Easy operator access to the work area
Low maintenance, high reliability scissor-style hard plumbing
Drive system sealed against water, dirt, and grit
High efficiency Generation 4 EnduroMAX® pump systems available in 30, 40, or 50 hp with operating efficiencies up to 85%
Robust and accurate design for tight tolerance cutting and reliable operation
Rapid Water Level Control for quiet submerged cutting
Optional Variable Speed Solids Removal System (VS-SRS) designed for industrial use increases uptime through automated solids removal
Factory tested as a complete system before shipping
Machines a wide range of materials and thicknesses, from metals and composites to glass and plastics
Designed and manufactured at the OMAX factory in Kent, Washington, USA
Does not create heat-affected zones or mechanical stresses
No tool changes & minimal fixturing dramatically reduce setup
Uses substantially less cooling water than inefficient hydraulic intensifier pumps
Small, efficient footprint for minimal floor space utilization
Lowest electrical consumption compared to other pump technology
Leaves behind a satin-smooth edge, reducing secondary operations
No noxious fumes, liquids, or oils used in, or caused by, the machining process
EnduroMAX pump technology delivers the highest nozzle horsepower in the industry for faster and more efficient cutting
Completes most work below 80 dBA
Environmentally “green” system uses only natural garnet abrasive and water in the cutting process
Highly robust and reliable pump design capable of over 1000 hours between maintenance

Machine Dimensions
Footprint (with controller)	11’ 7” x 5’ 7” (3,531 mm x 1,702 mm)
Weight (tank empty)	3,320 lb (1,506 kg)
Height (with scissor plumbing)	7’ 11” (2,413 mm)
Operating Weight	9,150 lb (4,150 kg)
Work Envelope
X-Y Cutting Travel	4’ 4” x 2’ 2” (1,321 mm x 660 mm)
Z-Axis Travel	8” (203mm)
Table Size	5’ 9” x 2’ 6” (1,753 mm x 762 mm)
Drive Description
Closed loop, digital drives Brushless servo motors Pre-loaded ball screws, recirculating ball bearings Linear bearings with hardened,precision ground ways Cantilever Y-Axis on bridge X-Axis
Standard Model Specifications
Material Support Slats	4" x 1/8" Galvanized Steel (102 mm x 3 mm)
Maximum Supported Material Load	400 lbs/sq ft (1,950 kg/sq meter)
Electrical Requirements	3-Phase, 380-480 VAC ±10%, 50-60 Hz
Noise Level	Below 80dBA at one meter for submerged cutting
Speed	180 in/min (4,572 mm/min)
Linear Positional Accuracy	±0.001" (±0.025mm)
Repeatability	±0.001" (±0.025mm)
Ballbar Circularity	±0.003” (±0.076 mm)
Optional Accessories
Tilt-A-Jet Cutting Head for taper elimination Collision Sensing Terrain Follower Rotary Axis Precision Optical Locator (POL) 7/15 Mini MAXJET5 Nozzle OMAX Mini MAXJET 5i Nozzle Laminar Filter Waterjet Brick Kit Material Holding Kit Splash Shield Kit Air & Water Conditioning Kit Water Recycling System Intelli-VISOR FSP Monitoring Expansion Package Variable Speed Solids Removal System (VS-SRS) Z-Axis Pneumatic Drill Water-only MAXJET 5 Nozzle Manual Tilt Z-Axis Laser Feature Finder Bulk Abrasive Delivery Assembly Catcher Tank Armor Plating Stainless Steel Tank Cover Kit Extended Slat Package (see more...)
*Optional accessories may reduce travel. Photos may show optional accessories. For a complete list of accessories, contact an OMAX sales representative. Pumps are built to meet UL and CE specifications. Contact OMAX for detailed utility requirements.