OMAX MicroMAX JetMachining Center

The MicroMAX® JetMachining® Center is the ideal solution for ultra-precision abrasive waterjet machining. Utilizing advanced high precision linear encoders, innovative vibration isolation, and proven software control systems, the MicroMAX JetMachining Center is capable of a positioning accuracy of less than five microns while retaining all the advantages of abrasive waterjet machining. The MicroMAX JetMachining Center can machine stainless steel, titanium, carbon fiber, PEEK, glass, nitinol, graphite, copper, composites, laminates, and more, with high precision and smooth finishing, for either prototyping or production.

Inquiry

Very high precision with 0.1 micron linear optical encoder system
Highly rigid structure with low mass bridges and carriages
Vibration isolation of table and gantries
Tilt-A-Jet cutting head for fast cutting with taper elimination
All components have matched thermal expansion
Equipped with 7/15 Mini MAXJET® 5 Nozzle
Revolutionary patent-pending process for fine abrasive feed rate
Full enclosure with environmental controls
Advanced pressure controls for piercing delicate materials
Machines a wide range of materials with high accuracy
No heat-affected zones or mechanical stresses
Leaves behind a satin-smooth edge, reducing secondary operations
Stiff construction greatly reduces vibration and increases accuracy
Easily cut non-conductive and reflective materials
Can machine hardened steel as easily as annealed steel
Full enclosure provides quiet and clean operation below 80db

Machine Dimensions
Footprint	1,880 mm x 2,134 mm (6’2” x 7’0”)
Weight (tank empty)	1,724 kg (3,800 lbs)
Height (with enclosure)	2,134 mm (7’0”)
Operating Weight	2,404 kg (5,300 lbs)
Work Envelope
X-Y Cutting Travel*	635 mm x 635 mm (2’1” x 2’1”)
Z-Axis Travel*	114 mm (4.5”)
Table Size	889 mm x 914 mm (2’11” x 3’0”)
Drive Description
Closed loop, digital drives Brushless servo motors Intelli-TRAX drive technology with linear encoders in X-Axis Precise Motorized Z-Axis
Pump Description
Output Pressure	60,000 psi (4,100 bar)
Orifice and Flow Rate1	0.010” / 0.43 gpm (0.25 mm / 1.63 lpm)
Dimensions	65” x 35” x 42” (1,651 mm x 889 mm x 1,067 mm)
Standard Model Specifications
Material Support Slats	102 mm x 3 mm (4" x 1/8") Galvanized Steel
Maximum Supported Material Load	1,950 kg/sq meter (400 lbs/sq ft)
Electrical Requirements	3-Phase, 380-480 VAC ±10%, 50-60 Hz
Speed	2.5 m/min (100 ipm)
Ballbar Circularity	±13 microns (±0.0005”)
Optional Accessories
Rotary Axis Precision Optical Locator Vacuum Assist Package Collision-Sensing Terrain Follower Water Recycling System Tank Cooling System MAXJET 5i Nozzle Assembly Variable Speed Solids Removal System Waterjet Brick Kit Material Holding Kit Laser Feature Finder Laminar Filter (see more...)
*Optional accessories may reduce travel. Photos may show optional accessories. For a complete list of accessories, contact an OMAX sales representative. Pumps are built to meet UL and CE specifications. Contact OMAX for detailed utility requirements.